MasterView Profile | MasterView Twin Lite | MasterView Twin 868 | MasterView 358
MasterView Mesh System 358 is the definitive mesh fencing system for perimeter protection, offering maximum security and anti-corrosion protection - all backed by an expert customer service team. MasterView Mesh System 358 is suitable for use in many locations where security is paramount and particularly where good visibility has to be maintained, such as prisons and airports.
The design of this system not only makes it the most secure within the MasterView Mesh System range, it creates the most formidable perimeter solution available today.
|
MasterView Mesh System 358 |
2.1m |
2.4m |
3.0m |
|
Panel height - mm |
2134 |
2438 |
2997 |
|
Panel width - mm |
2515 |
2515 |
2515 |
|
Mesh size - mm |
|
12.7 x 76.2 |
|
|
Vertical wire - mm |
|
4 |
|
|
Horizontal wire - mm |
4 |
||
|
Panel weight - kg |
50 |
57 |
70 |
|
Posts - mm |
60x60 |
60x60 |
80x80 |
|
Post length - m |
2.8 |
3.1 |
4.0 |
|
Clamp bar - mm |
|
40 x 6 |
|
|
Fixings per clamp bar |
8 |
9 |
11 |
358 Posts: Square hollow section posts provide additional strength and safety to the MasterView Mesh System 358 range. Plastic post-tops prevent water ingress. Baseplated, cranked and bespoke post specifications are also available.
358 Finishes: MasterView Mesh System 358 panels are available in two finishes: Galvfan or Pre-galvanised and polyester powder-coated (BS 1722 (BS 6497) Part 16 compliant) providing an architectural coating of 60 microns minimum which greatly extends the life of the fence. MasterView Mesh System posts and clamp bars are available hot dip galvanised to BS EN 1461 or galvanised and powder-coated.
358 continuous clamp bar fixing: The most secure method of securing panels to posts. A continuous 40 x 6mm flat bar clamps the mesh panels together. M8 fixings pass through the posts and are secured from the inside of the fence by means of anti-vandal and tamper resistant Permacone security fixings.
358 Features and Benefits
|
Features |
Benefits |
|
|
12.7 x 76.2mm mesh aperture |
Virtually impossible to climb, penetrate or cut. Minimal visual impact |
|
|
Posts are 3mm - Minimum SHS |
MasterView Mesh System posts are the strongest of any comparable system |
|
|
MasterFix - Continuous clamp bar fixing |
Most secure mesh-fixing method. No threaded inserts in posts which can spin making installation difficult |
|
|
Permacone M8 security fixings |
Anti-vandal and tamper resistant |
|
|
MasterView Mesh System 358 is available in powder n MasterView Mesh System 358 specifications can be coated or galvfan finishes |
MasterView Mesh System 358 specifications can be tailored to suit most budgets |
|
|
MasterView Mesh System is manufactured in the UK |
Extensive stocks are available for immediate despatch on Peart Fencing transport with crane offloading |
*Specifications are for guidance only and are subject to change without prior notice